ndt期刊投稿

ndt期刊投稿

首先我们要知道，文章被拒是很常见的事。

大多期刊的拒稿率在50%-60%，有些可能还更高。比如Plastic and Reconstructive Surgery 拒稿率约有85%。

就连获得诺贝尔奖的文章也曾被拒绝发表。比如，Nature 曾拒绝了关于切伦科夫辐射 (应用于核反应堆)的手稿和 Deisenhofer等人关于光合作用的重要工作 。

二、文章被拒，不代表没有发表机会

文章被拒稿并不意味着失败，再次投稿依然有成功发表的机会，这一点已被很多期刊编辑部的调查证实：

Journal of bone and joint surgery-American volume

编辑调查发现，在被 JBJS-A 拒稿后的五年内，有75.8%（696 篇）的手稿已经成功发表。

Nephrology Dialysis and Transplantation

研究分析了被NDT拒稿的论文的随机样本(10%)。在编辑初审和同行评审后被拒稿的论文中，分别有59%和61%被其他期刊接受。进一步的分析显示，随后发表的期刊少部分影响因子高于NDT，大部分低于NDT（当然，影响因子仅作为参考标准）。

Kidney Research and Clinical Practice

在被KRCP拒绝的文章中，约有69%的文章被拒稿后发表在其他期刊上。这可能是因为作者采纳了审稿人和编辑提供的改进建议，重新修改了文章。

Clinical Otolaryngology

研究发现，55.7%的拒稿论文发表在其他期刊上。这些论文的发表时间平均延迟约1年。有8%的论文发表在影响因子高于CO的期刊上。

Medicina Intensiva (English Edition)

69%的文章被拒稿，其中48.8%的手稿随后发表在其他期刊。

三、论文被拒后，可以考虑的策略

1. 重视细节，材料完整

据调查，被JBJS-A拒稿的主要原因里有一项是利益冲突披露。这类拒稿理由可以归类于投稿材料不完整或者投搞格式不正确，其实是最容易避免的问题。

投稿前认真查看期刊投稿指南，根据要求准备就可以了。千万不要草率提交，然后花费更多的时间去弥补问题。

2. 一鼓作气，尽快提交

同样的，在JBJS-A的调查中，那些被拒稿后5年还没发文章的作者表示，影响他们的主要原因是缺乏时间（51.4%）。

虽然研究者大多都很繁忙，但是文章越拖越难发表也是事实~

3. 分析拒稿理由，对症下药

如果期刊拒稿后提供了审稿意见/编辑意见，作者最好根据意见仔细修改，还可尝试重投该期刊。

如果期刊没有提供意见，有可能是研究没达到期刊要求或者不符合期刊范围/风格，作者应该选择更合适的期刊重投。在重投之前，建议全面检查手稿，进一步提高研究质量。总的来说，根据已有调查，大多文章都是有机会发表的，我们不必因一时的拒稿而沮丧。就像KRCP期刊编辑所说的：

Authors can turn failure into opportunity by publishing their valuable discoveries in other peer-reviewed journals.作者可以在其他同行评审期刊上发表他们有价值的发现，将失败转化为机遇。

international journal of fatigue是什么期刊

机械疲劳类的顶尖期刊,比较难中!加油吧! 近四年影响因子 2013年度 2012年度 2011年度 2010年度
1.694 1.976 1.546 1.799

中科院杂志分区 工程：机械分类下的 3 区期刊

出版社或管理机构 杂志由 ELSEVIER SCI LTD 出版或管理。 ISSN号：0142-1123
杂志简介/稿件收录要求 International Journal of Fatigue is dedicated entirely to the full range of science and technology associated with fatigue. The scope of the journal includes the study, analysis, and modeling of fatigue and fatigue-related processes from the atomic level to global engineering behaviour, in all classes of materials and material systems. International Journal of Fatigue provides a timely forum for information and discussion for engineers, researchers, and educators that is dedicated entirely to the subject of fatigue. The technical integrity of the journal is maintained by an international Editorial Advisory Board of leading experts and by the review of all papers (including those in special issues and supplements) by at least two and very often three peers. Timely publication is emphasized (typically within 7-9 months); all papers are available electronically as part of the renowned 'ScienceDirect' on-line service of Elsevier. Typical subjects discussed in International Journal of Fatigue include the following: Degradation mechanisms (driven by mechanical, chemical, thermal, and other applied environments) Modeling (including fracture mechanics, damage mechanics, crack growth, kinetics, life prediction, damage tolerance, durability) Manufacturing and processing effects (associated with forming, machining, curing, initial defects, and residual stresses) Testing and characterization (including sensors, monitoring, methodology, interactive control, accelerated methods, data interpretation) Applications of all types (including structural integrity, design and maintenance). Combined and coupled behaviour such as creep-fatigue and stress rupture-fatigue is also included in the scope of the journal. The journal particularly welcomes review papers as well as suggestions for special issues either on topical areas in fatigue of materials or containing selected papers from international expert conferences. International Journal of Fatigue will present two annual awards: one for Advances in Fatigue and one for the Outstanding Paper in any volume. Related Conference The International Congress on Fracture is a series of meetings held every 4 years. The conference scope is sure to be of interest to readers of Engineering Fracture Mechanics, Theoretical and Applied Fracture Mechanics, International Journal of Fatigue, Engineering Failure Analysis, International Journal of Pressure Vessels and Piping, NDT&E, Journal of the Mechanics & Physics of Solids, International Journal of Solids & Structures, Mechanics of Materials and related mechanics/materials titles. All interested researchers in the mechanics and mechanisms of fracture, fatigue and strength of solids are invited to submit a paper to the next ICF and/or attend as a delegate.

NDT&E International????什么意思啊?

NDT&E International一个工程与材料与金属材料方面的无损检测方向的专业学术期刊，是Nondestructive Testing and Evaluation International的缩写，为SCI全检期刊，这个期刊的影响因子是1.446,近五年来的影响因子是1.539。

紧急求助：帮忙查询Optics & Laser Technology是哪个国家的期刊？2011年或2012年是否被SCI或EI收录？谢谢！

爱思维尔出的 SCI收录 详细信息如下
Optics & Laser Technology
Optics & Laser Technology aims to provide a vehicle for the publication of a broad range of high quality research and review papers in those fields of scientific and engineering research appertaining to the development and application of the technology of optics and lasers. Papers describing original work in these areas are submitted to rigorous refereeing prior to acceptance for publication.
The scope of Optics & Laser Technology encompasses, but is not restricted to, the following areas:
•development in all types of lasers
•developments in optoelectronic devices and photonics
•developments in conventional optics, optical instruments and components
•techniques of optical metrology, including interferometry and optical fibre sensors
•LIDAR and other non-contact optical measurement techniques, including optical methods in heat and fluid flow
•applications of lasers to materials processing, optical NDT display (including holography) and optical communication
•research and development in the field of laser safety including studies of hazards resulting from the applications of lasers (laser safety, hazards of laser fume)
•developments in optical computing
The Journal publishes and, from time to time commissions, review articles pertaining to important areas of optical and laser technology. Short communications and technical notes are also published. Short papers for rapid communication of important innovations or observations will receive fast-track treatment.
Optics & Laser Technology aims to provide the widest possible coverage of world research and development in its chosen field.

Optics & Laser Technology aims to provide a vehicle for the publication of a broad range of high quality research and review papers in those fields of scientific and engineering research appertaining...

View full aims and scope

Editor-in-Chief: A. Cusano
View full editorial board
Guide for AuthorsSubmit Your PaperTrack Your PaperOrder JournalAccess Full TextShare on favoritesImpact Factor: 1.616
Impact Factor:
2010: 1.616
© Thomson Reuters Journal Citation Reports 20115-Year Impact Factor: 1.266
Five-Year Impact Factor:
2010: 1.266
To calculate the five year Impact Factor, citations are counted in 2010 to the previous five years and divided by the source items published in the previous five years.
© Journal Citation Reports 2011, Published by Thomson ReutersImprint: ELSEVIERISSN: 0030-3992